make your home smart find out more at
GENERAL ZWAVE INFORMATION
GROUP ID: 1 - Lifeline
MAX NODES IN GROUP: 1
This product will in some cases try to interpret BASIC_SET received from devices
and perform the appropriate action (Eg. a basic set 0xFF or 0x0 received from a
binary sensor might be interpreted be interpreted as a change of sensor state).
Unsupported devices can be controlled with the BASIC_SET command by sending
0x0 and 0xFF values to the unsupported device. The UI control for the BASIC_SET
command will be in the “Lights & power” section of the dashboard.
This product can be included and operated in any Z-Wave network with other
Z-Wave certified devices from other manufacturers and/or other applications. All
non-battery operated nodes within the network will act as repeaters regardless of
vendor to increase reliability of the network.
This product is a security enabled Z-Wave product that is able to use encrypted
Z-Wave messages to communicate to other security enabled Z-Wave products.
SUPPORTED ASSOCIATION GROUPS
BASIC COMMAND CLASS HANDLING
OTHER INFORMATION
Zwave plus device type: Central controller
Zwave plus role type: Central static controller
Supported command classes:
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_APPLICATION_STATUS
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_CRC_16_ENCAP
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_MULTI_CMD
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_VERSION
To Next Page
Loading...
