Zipamini, check the videos or other content on Zipato website for assistance.
Error “Allowed registration time elapsed”
Serial number must be entered within 2 min after turning on Zipamini. If not, message
will appear saying “Allowed registration time elapsed”. This is done because security
precaution. Allowed registration time starts ticking away after Zipamini establishes
connection with the cloud server after power up/reset. So just reset your Zipamini,
wait for the light to turn steady green, and the login into the cloud application and enter
the serial number.
I have added device to Zipamini, but is not working properly?
If your device is not working properly try to reinstall it again. Make sure when adding
new device that join procedure is completed. If join procedure is successful you will
get message “Device joined” and Close button will appear.
What happens when adding new device is interrupted?
If device shows up in total devices window, delete it and then add this device again. If
that device is not shown in total devices window just add this device again.
Do not forget to synchronize
When doing changes with your device like changing endpoint name, configuration or
any change regarding devices and their endpoints, remember to click on synchronize.
Does Zipato offer a warranty?
21
ZIPAMINI
QUICK INSTALLATION GUIDE
To Next Page
Loading...