ZIPPER MASCHINEN ZI-BAT50

Questions and Answers

B
Bianca BrownAug 7, 2025
Why is the motor not starting on my ZIPPER MASCHINEN ZI-BAT50 Dehumidifier?
- M
  Mr. Peter BellAug 7, 2025
  If the ZIPPER MASCHINEN Dehumidifier's motor isn't starting, several issues could be the cause. First, check the power supply. Also, the fuses might be defective, so you should replace them. Another potential cause is a defective main cable, which would need to be changed. If the water tank is full (E4), empty it. If the room's humidity is too high, adjust the humidity setting. Lastly, the humidity sensor (E3) or the refrigeration circuit sensor (E5) may be defective and need replacement.
K
Karen TerryAug 14, 2025
What to do if my ZIPPER MASCHINEN Dehumidifier is not collecting water?
- S
  Stephen PearsonAug 14, 2025
  If your ZIPPER MASCHINEN Dehumidifier is producing less condensation or no water, it could be due to several reasons. Check if the room temperature or air humidity is within the working range and adjust it accordingly. A contaminated air filter can also cause this issue, so clean it. Make sure the air inlet and outlet are not blocked; if they are, relocate the machine. Finally, ensure all doors and windows are closed to maintain proper conditions.
M
Michelle TaylorAug 22, 2025
Why does my ZIPPER MASCHINEN ZI-BAT50 Dehumidifier shut down when using a drain hose?
- K
  Kimberly HornAug 22, 2025
  If your ZIPPER MASCHINEN Dehumidifier shuts down during continuous operation with a drain hose, it might be because the drain hose is kinked or wound up, preventing proper water flow. Re-route the drain hose to allow unhindered water flow. Alternatively, water may be frozen in the hose, so take precautions to prevent freezing.
S
Sara HarperAug 29, 2025
What to do if water is leaking from my ZIPPER MASCHINEN ZI-BAT50?
- D
  Daniel CainAug 29, 2025
  If water is flowing out of your ZIPPER MASCHINEN Dehumidifier, it could be due to a leakage in the water tank, which would require you to change the water tank. Another possibility is that the drain hose is not properly placed into the opening of the water tank; ensure it is correctly positioned.

Summary

SAFETY Instructions

Intended Use of the Machine

Machine intended for drying humid walls or reducing humidity in rooms > 11m² within specified limits.

Technical Restrictions

Machine intended for use under specific ambient conditions: Rel. Humidity 30-80%, Temp +5°C to +32°C.

Prohibited Use; Foreseeable Misuse

Prohibits use by unqualified persons, in explosive environments, outside limits, or with modifications.

User Requirements

Requires suitable persons and knowledge of instructions; notes on supervision and local age restrictions.

General Safety Instructions

General safety points for operation: check machine, level surface, clear space, remove tools, check connections.

Electrical Safety

Ensures proper earthing, cable handling, plug/socket usage, and protection against water entry.

Special Safety Instructions

Instructions on safety hood usage, keeping body parts away from moving machinery.

Hazard Warnings

Explains DANGER, WARNING, CAUTION, NOTICE symbols and residual risks like electrical hazards.

OPERATION Guide

Operation Instructions

Guidance on room sealing, dehumidifier placement, power requirements, and operational parameters.

Operation Start and Stop

Details on starting and stopping the machine, and initial display indications.

Humidity Value Setting

How to adjust the desired humidity level using control buttons and recommended settings.

Automatic Defrosting

Explains the automatic defrosting function, including display indicators and compressor behavior.

MAINTENANCE Procedures

Empty the Water Tank

Procedure to safely empty the water tank, including switching off and re-inserting.

Continuous Operation Mode

Guidance for continuous mode using a drain hose, bypassing the water tank.

Maintenance Plan: Air Filter

Instructions for regular air filter cleaning: removal, vacuuming/washing, and re-insertion.

STORAGE and CLEANING

Storage Instructions

Guidance on storing the machine in a dry, closed place out of reach of children.

Disposal of Machine

Instructions for proper disposal of the machine, advising local authorities and dealers.

WIRING DIAGRAM and SPARE PARTS

Wiring Diagram

Schematic representation of the machine's electrical connections and components.

Exploded View ZI-BAT50

Exploded view diagram for the ZI-BAT50 model, with numbered parts.

Spare Parts List ZI-BAT50

Comprehensive list of spare parts for ZI-BAT50 with corresponding part numbers and names.

Exploded View ZI-BAT60

Exploded view diagram for the ZI-BAT60 model, with numbered parts.

Spare Parts List ZI-BAT60

Comprehensive list of spare parts for ZI-BAT60 with corresponding part numbers and names.

Declaration of Conformity

EU Declaration of Conformity

Statement confirming the machine meets essential safety and health requirements of EU directives.

WARRANTY GUIDELINES

Warranty Terms and Conditions

Details warranty periods, claims process, and exclusions for mechanical and electrical components.

Claims for Compensation

Limits liability for damages, defects, or loss of earnings during the warranty period.

Warranty Guidelines (English)

English version of warranty terms, claim procedures, and exclusions for consumer and professional use.

PRODUCT MONITORING and SERVICE

Product Monitoring

Company process for quality improvement based on user feedback and experiences.

Service Form

Form for service inquiries, spare part orders, or warranty claims, requiring detailed information.