Zipper Mowers ZI-GPS70G User Manual (English)

Other manuals for Zipper Mowers ZI-GPS70G

Questions and Answers:

C
cchaseAug 17, 2025
Why Zipper Mowers Lawn and Garden Equipment motor does not start?
- L
  Loretta HerreraAug 17, 2025
  The motor may not start due to several reasons. It could be that there is no fuel, so you should refuel. Alternatively, the fuel may not be in the fuel pipe; in this case, squeeze the fuel nipple three times. A clogged fuel filter could also be the cause, so clean the filter in the fuel tank and use a filter when refueling to prevent future clogging. Another possibility is a dirty or damaged spark plug; clean the spark plug from debris and check the contact distance, ensuring it is between 0.6 and 0.7mm (credit card thickness). Finally, a faulty fuel line could be the issue; inspect the fuel line for damage and kinks.
D
David MorenoAug 20, 2025
What to do if Zipper Mowers Lawn and Garden Equipment machine does not work with full power?
- P
  Paul VargasAug 20, 2025
  If your machine isn't working at full power, it might be due to a few reasons. The carburetor could be incorrectly adjusted. The machine might be overloaded, so try exercising less power while working. Also, the silencer could be clogged; try cleaning the outlet.
M
michaelbarryAug 22, 2025
What causes bad cuts with Zipper Mowers Lawn and Garden Equipment brush cutter?
- D
  Dale SummersAug 22, 2025
  Bad cuts with the brush cutter can occur for several reasons. Foreign material, such as grass, might be wrapped around the sheet. If this happens, shut the machine off, wait until the cutter stands still, and remove the winded-up material. Long grass can also cause this issue; remove the excess material. Finally, a blunt saw blade will result in poor cuts, so sharpen or replace the saw blade.
W
Wendy LopezAug 25, 2025
What causes bad cuts with Zipper Mowers Lawn and Garden Equipment trimmer?
- J
  jrussellAug 26, 2025
  If you're experiencing bad cuts with your trimmer, it could be due to a couple of reasons. The cutting line might be too short, requiring cutting line tracking. Alternatively, the trimmer attachment might be empty, necessitating a trimmer attachment change.
P
pvalenzuelaAug 27, 2025
Why Zipper Mowers Lawn and Garden Equipment hedge trimmer makes bad cuts?
- Y
  yfrankAug 27, 2025
  Bad cuts with a hedge trimmer can be caused by a few things. Too much friction could be the problem, so try oiling the hedge trimmer. The sliding clearance might be too low.
D
Dr. Kathleen AndersonAug 30, 2025
How to start Zipper Mowers Brush Cutter if it doesn't start?
- R
  Rebecca JacksonAug 30, 2025
  If the Zipper Mowers Brush Cutter motor doesn't start, it could be due to several reasons. First, check if there is enough fuel. If not, refuel. If there is fuel, ensure it's reaching the engine by squeezing the fuel nipple three times. A clogged fuel filter can also prevent starting, so clean the filter inside the fuel tank, using a filter when refueling to prevent future clogs. Inspect the spark plug for dirt or damage and verify the contact distance is between 0.6 and 0.7mm (roughly the thickness of a credit card). Finally, examine the fuel line for any damage or kinks that might be obstructing fuel flow.
J
Jennifer DavisSep 2, 2025
Why Zipper Mowers Brush Cutter does not work with full power?
- E
  Elizabeth RitterSep 2, 2025
  If your Zipper Mowers Brush Cutter isn't working at full power, the carburetor may be incorrectly adjusted, which requires adjustment by customer service. The machine might be overloaded, so use less power while working. Another possibility is a clogged silencer, in which case you should clean the outlet.
W
wwilliamsSep 5, 2025
What to do if Zipper Mowers Brush Cutter makes bad cuts?
- T
  Travis JeffersonSep 5, 2025
  If your Zipper Mowers Brush Cutter is making bad cuts, it could be due to a few reasons. Check if any foreign material, like grass, is wrapped around the blade and remove it after shutting off the machine and waiting for the cutter to stand still. If you're cutting long grass, remove the excess material. A blunt saw blade will also result in poor cuts, so sharpen or replace the saw blade.
C
Cynthia SmithSep 8, 2025
What causes bad 'Teig' cuts with Zipper Mowers ZI-GPS70G Brush Cutter?
- M
  Miss Jillian NorrisSep 8, 2025
  If your Zipper Mowers Brush Cutter is making bad 'Teig' cuts, it could be due to a blunt chain, in which case you should sharpen or change the chain (contact customer service). Check the chain tension. Ensure the chain is installed correctly, with the teeth pointing in the cutting direction. Also, check the oil level.
M
Michael MorrisonSep 10, 2025
Why Zipper Mowers Brush Cutter hedge trimmer makes bad cuts?
- B
  Brittany VelazquezSep 12, 2025
  If your Zipper Mowers Brush Cutter hedge trimmer is making bad cuts, it could be due to too much friction. Oil the hedge trimmer. Also, the sliding clearance might be too low, so make adjustments of sliding clearance (contact Customer service). Finally, the hedge trimmer might be dull, so sharpen it (contact Customer Service).