Zipper Mowers ZI-HS7 User Manual (English)

Questions and Answers:

N
Natalie JonesAug 3, 2025
What to do if the motor of my Zipper Mowers Log Splitter does not start?
- M
  matthewmorrisAug 3, 2025
  If the motor of your Zipper Mowers Log Splitter doesn't start, there might be a few reasons. First, check your fuse box to ensure there is power in the wall socket. A defective extension cable could also be the problem; unplug it, inspect it, and replace it if needed. Ensure you're using the correct power supply (400 V, three-phase) with a 5-pole plug of 1.5 mm diameter. Lastly, the switch might be defective, in which case you should have it checked by an electrician.
E
Emily MurrayAug 9, 2025
Why is the splitter not moving on my Zipper Mowers ZI-HS7, even though the motor is running?
- H
  heatherfisherAug 9, 2025
  If the splitter on your Zipper Mowers Log Splitter isn't moving even though the motor is running, it could be due to a loose connection causing the valve not to open. Try tightening any loose parts. Alternatively, the oil level might be too low, so replenish the oil.
F
fhendersonAug 18, 2025
How to fix untypical noise and vibration in Zipper Mowers ZI-HS7?
- J
  johnstonkennethAug 18, 2025
  If your Zipper Mowers Log Splitter is working with unusual noise and vibration, it's likely due to a low oil level. Replenishing the oil should resolve this issue.
A
amyhoweAug 26, 2025
How to correct the motor direction on a Zipper Mowers Log Splitter?
- E
  Eric FaulknerAug 26, 2025
  If your Zipper Mowers Log Splitter has the wrong motor direction, it's likely due to wrong polarity. To fix this, change the polarity using a screwdriver. It is recommended to have this done by an electrician.

Zipper Mowers ZI-HS7 Specifications

General

Motor Power S6 (40%)	2.2 kW
Voltage	230 V
Max. Splitting Length	520 mm
Hydraulic Oil Capacity	3.5 L
Max. Wood Diameter	250 mm
Splitting Force	7 tons
Wheel Size	200 mm