What to do if Zipro Elliptical Trainer shows E-7 error?
If your Zipro Elliptical Trainer displays an E-7 error, it means the cables connecting the console to the bike are disconnected or improperly connected. To fix this, first, disconnect the power source, then disconnect the cables. Reattach the cables and the power source. If the error persists, repeat the process.
Why is there a lack of resistance during training on my Zipro Elliptical Trainer?
A lack of appropriate resistance during training on your Zipro Elliptical Trainer can occur if the resistance adjustment cable is connected incorrectly. Ensure the cable is correctly connected as per the assembly manual. If the issue persists, contact the manufacturer’s service, as the drive belt may be loose, the distance between the flywheel and the magnets may have increased, or the voltage regulator may be damaged.
What to do if my Zipro Elliptical Trainer rocks to the sides?
If your Zipro Elliptical Trainer rocks to the sides, it could be due to a few reasons: * The device is placed on an uneven surface. Make sure to place the device on an even surface and remove any object disrupting the balance under the base. * The bases have not been assembled correctly. Ensure you assemble the bases correctly and level the caps on the rear base. * Caps on the base have not been installed and leveled correctly. Assemble the rear base correctly and level the caps on the rear base.
Why is my Zipro Elliptical Trainer not connecting to Bluetooth?
If your Zipro Elliptical Trainer is not connecting to Bluetooth, ensure that Bluetooth is enabled on your mobile device and attempt to pair your mobile device with ZIPRO.
What to do if Zipro Elliptical Trainer shows E-4 error?
If your Zipro Elliptical Trainer displays an E-4 error, it means the numerical scale was exceeded when reporting the age, height, or weight of a user. When entering user data, provide data that fit the scale.
What to do if Zipro Elliptical Trainer shows E-1 error?
If your Zipro Elliptical Trainer displays an E-1 error, it means the device is not receiving input while measuring your body fat. Keep both hands on the pulse sensors during the measurement.
Why do the saddle or handlebars sway on my Zipro Elliptical Trainer?
If the saddle or handlebar sway on your Zipro Elliptical Trainer, it is likely because the bolts and knobs of the saddle post or handlebar post have not been tightened. Tighten the bolts and knob of the saddle or handlebar post to resolve this issue.
Why does my Zipro Elliptical Trainer make noise during use?
If your Zipro Elliptical Trainer is making noise during use, it may be due to incorrectly tightened elements. Contact the manufacturer’s service to resolve this issue.
What does it mean if Zipro Elliptical Trainer shows E-2 error?
If your Zipro Elliptical Trainer displays an E-2 error, it indicates a power system error. Contact the manufacturer's service for assistance.
Why is my Zipro Elliptical Trainer making noise and operating unevenly?
If your Zipro Elliptical Trainer is making noise and operating unevenly, it may be because the bearings are damaged. Contact the manufacturer’s service for assistance.
How to adjust the handlebar position for optimal comfort and ergonomics.
Instructions for setting and securing the pedal positions.
How to adjust the stride height using the arm adjustment knob.
Details the warm-up phase, including stretching exercises to prepare the body.
Describes the main part of the workout and target heart rate zones.
Explains the cool-down phase to help muscles recover after exercise.
Covers how the computer powers on and its automatic shut-off feature.
Explains the function of each button on the computer console.
Details the display metrics like time, speed, distance, calories, RPM, pulse, and watt.
Guides users on choosing different workout programs like Manual, Beginner, Advanced, and Sporty.
Explains how to set up and use heart rate controlled training programs.
Details the process for setting up and using Watt controlled training programs.
Describes how to use the recovery feature to assess fitness after exercise.
Outlines the steps for measuring body fat using the computer console.
Explains how to accurately measure pulse rate using the handlebar sensors.
Guides on setting time, distance, or calorie targets for training countdowns.
Instructions for connecting the computer to a mobile app via Bluetooth.
Outlines the terms, conditions, and exclusions of the product warranty.
General| Brand | Zipro |
|---|---|
| Model | Dunk Gold |
| Category | Elliptical Trainer |
| Language | English |
To Next Page
