27
EN
ASSEMBLY GUIDELINES
ATTENTION! Do not use parts other than those provided by the manufacturer.
● The trampoline should be assembled by two adults. If you have any problems
assembling the trampoline, ask a qualified specialist for help.
● Before you start assembling, read all the guidelines carefully.
● The trampoline must be placed on an even surface, preferably on the grass.
Placing it on a hard surface, e.g. concrete, may lead to the frame damage and
invalidate warranty. Placing it on an uneven or slippery surface can make the
trampoline unstable when bounding and threaten the user's safety.
● Unpack and arrange all the parts included in the package.
● Check the part list in the manual and ensure the package contains all
components.
● Ensure you have enough space for assembly. The assembly and subsequent
use of the trampoline requires ca. 8 metres of free space.
● Do not place anything under the trampoline.
● In the trampoline vicinity (less than 2 m) there cannot be any electrical cables,
tree branches, pools, fences, slides and toy houses, other garden toys etc.
● Remember that there is a risk of injury when you use tools for the assembly. Be
careful.
● Do not assemble/dismantle the trampoline and do not use it during rain, storm
or a strong wind.
● The trampoline frame is made from metal and conducts electricity. In its
vicinity there must not be any electrical equipment.
● The location where you are going to use the trampoline must be light and well-
lit.
TRAMPOLINE DIMENSIONS
Size (FT) 8" 10" 12" 14" 16"
Frame diameter (cm) 252 312 374 435 496
Total height (cm) 205 256 260 260 277
Mesh height (cm) 150 180 180 180 180
Distance of the bed to the
ground (cm)
55 76 80 80 90
To Next Page
Loading...