30
EN
PL
STEP 3
Install all legs (assembled in step 2) to the frame ring (assembled in step 1).
STEP 4
Spread the trampoline board (C) and fix it to the frame with springs (D). Tension the
spring using the tool (H). Attach one end of the spring to the bed and the other in a
hole in the frame.
To ensure uniform bed stretch, attach the springs alternatively on 4 sides of the
frame. Install the first one at 12.00 of the frame, the second at 6.00, the third at 9.00
and the fourth at 3.00. The successive springs should be installed analogously at four
sides of the frame.
PLEASE NOTE! Be careful when using the tool (H).
To Next Page
Loading...