Zirkon zahn M1 MILLING UNIT COMPACT LINE User Manual

52 pages

To Next Page

m1 milling unit compact line

Operation and maintenance manual

Table of Contents4
Milling Units Overview8
Operation and Maintenance Manual9
Service10
General11
General Description of the Milling Unit11
Functional Description of the Milling Unit11
Device ID Plate12
Manufacturer12
Usage13
Intended Use13
Not Intended Use14
Safety and Residual Risks15
Symbols Used in this Manual and on the Milling Unit15
Danger Symbols15
Other Symbols16
Residual Risks and Safety Regulations16
Possible Sources of Danger17
Installation Site19
Important Instructions for Setting up the Milling Unit19
Components21
Checklist of Components Standard Version21
M1 Milling Unit23
Recommended Additional Articles24
Ioniser M124
Raw-Abutment ® Holder24
Glass Ceramics Holder24
Jawpositioner Support24
Zero Point Stylus D6 for M1/M4 Milling Units25
Zirkonzahn.software25
Installation27
Transport and Unpacking27
Operation29
Connecting the Desktop PC (Option 1)29
Connecting the All in One Touch PC (Option 2)29
Connection of the Milling Unit30
Connecting the Grindcontrol30
First Start-Up33
Normal Use33
Safety Aspects33
Always Wear Security Equipment33
Procedure34
Cleaning35
Cleaning Instructions35
Safety Measures When Cleaning the Milling Unit35
Cleaning Intervals36
Daily or after each Use36
Weekly36
Monthly36
Clean Milling Chamber36
Cleaning of the Grindcontrol36
Cleaning of the Orbit with Wet Processing (with Orbit Cleaning Liquid)36
Cleaning of Spindle and Chuck37
Maintenance39
Maintenance and Control39
Repairs and Troubleshooting41
Detected Faults41
Restart Protection after Power Failure41
Spindle Exchange41
E-Box Exchange42
Printed Circuit Boards Exchange42
Front Plate Exchange42
Long-Term Shutdown42
Disposal42
Training and Practice43
Procedure in the Event of Faults43
Detected Faults43
Possible Faults and Troubleshooting43
Milling Unit Is Not Responding43
Milling Process Does Not Start43
Collet Chuck Does Not Open - Changing of the Burs Is Not Working43
Interrupted Milling Process44
Inaccurate Milling Result44
Return44
Warranty45
Warranty Claim45
Loss of Warranty45
The Warranty Does Not Cover46
Technical Improvements46
Technical Data47
Technical Data of the M1 Milling Unit47
Option 2: All in One Touch PC48
Compressed Air Requirements48
Connection to the Power Supply System Via Residual-Current Circuit Breaker49
Environment and Storage Conditions49
Permissible Transport Conditions49

Need help?

Do you have a question about the Zirkon zahn M1 MILLING UNIT COMPACT LINE and is the answer not in the manual?

Zirkon zahn M1 MILLING UNIT COMPACT LINE Specifications

General

Brand	Zirkon zahn
Model	M1 MILLING UNIT COMPACT LINE
Category	Industrial Equipment
Language	English

Zirkon zahn M1 MILLING UNIT COMPACT LINE User Manual

Table of Contents

Zirkon zahn M1 MILLING UNIT COMPACT LINE Specifications