EasyManua.ls Logo

Ziton ZP700 Series - User Manual

Ziton ZP700 Series
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ZP700 Series Addressable Detector
Installation Sheet
1
2
3
4
EN: Installation Sheet
Description
ZP700 Series Addressable Detector models are shown in
Table 1.
Table 1: Models
Number Description
ZP720-3P Addressable Thermal Sensor, Polar White
ZP730-2P
ZP730-2B
ZP730-2S30
Addressable Optical Smoke Sensor, Polar White
Addressable Optical Smoke Sensor, Black
Addressable Optical Smoke Sensor, Chubb
ZP732-2P
ZP732-2S30
Combination Smoke and Heat Detector, Polar White
Combination Smoke and Heat Detector, Chubb
Figures
Figure 1: Inserting the detector
Figure 2: Position of the locking tab
Figure 3: Removing a locked detector
Figure 4: Setting the address
Installation
Note: For general guidelines on system planning, design,
installation, commissioning, use and maintenance, refer to the
EN 54-14 standard and local regulations.
To install a detector:
Insert the detector head into the mounting base and rotate it
clockwise until it clicks into place (Figure 1).
The detector may be locked into the mounting base if required.
To do this, remove the locking tab before installation shown in
Figure 2.
www.acornfiresecurity.com
www.acornfiresecurity.com
Question and Answer IconNeed help?

Do you have a question about the Ziton ZP700 Series and is the answer not in the manual?

Summary

EN: Installation Sheet

Description

ZP700 Series Addressable Detector models are shown in Table 1.

Figures

List of figures illustrating detector installation and features.

Installation Procedure

Steps for installing the detector head into the mounting base.

Specifications

Regulatory Information

Certification

Details on certification body and CE marking.

Declaration of Performance Number

Document reference number for declared performance.

Product Identification

List of product identifiers for the ZP700 series.

Intended Use

Specifies the intended application of the device.

Essential Characteristics

Key features declared for the product.

Manufacturer Information

Information about the company that manufactured the device.

European Union Directives

Compliance statements related to EU directives like R&TTE and WEEE.

Ziton ZP700 Series Specifications

General IconGeneral
Operating Temperature-10°C to +55°C
Alarm Current≤ 20mA
Humidity0-95% RH (non-condensing)
Humidity Range0-95% RH (non-condensing)
WeightApprox. 150g
CertificationsEN54