ZJBENY BCP Series - User Manual

Other manuals for ZJBENY BCP Series

Questions and Answers

tiffanybraunAug 4, 2025

What to do if the DLB current is abnormal on my ZJBENY Automobile Battery Charger?

R
Robert NunezAug 4, 2025
If the DLB current of your ZJBENY Automobile Battery Charger is abnormal, first verify that the CT is clamped on the correct power cord and that the CT position is correct. Also, ensure that the CT open coil is securely connected. Finally, check the connection between the CT cable and the DLB to make sure it is not loose. It is also possible that the DLB box doesn’t measure the charging current of EV charger, check whether the cable is connected and if the CT position is correct.

davistamiAug 20, 2025

Why is my ZJBENY Automobile Battery Charger showing DLB offline?

L
Lisa SmithAug 21, 2025
If your ZJBENY Automobile Battery Charger displays 'DLB offline', the RS485 cable might be damaged and needs replacement. Alternatively, the RS485 cable may not be firmly connected; try reconnecting it.

Summary

Normal DLB

About DLB

Introduction to the Dynamic Load Balancing (DLB) system for AC EV chargers.

DLB Model Selection

Comparison of DLB models BCP-DLB-01S and BCP-DLB-03S specifications and features.

DLB Extreme Mode

Explanation and activation methods for Extreme Mode to prevent home overload during EV charging.

How DLB Box Works

Diagrams illustrating correct and incorrect installation for 1-phase and 3-phase DLB systems.

DLB Current Setting Logic

Explains how DLB calculates EV charger current based on load and grid currents for different phases.

DLB Installation

Details required accessories and network cable connections for installing the DLB box.

DLB CT Clamp Installation

Instructions for CT clamp installation on mains cables for single and three-phase DLB boxes.

Setting Max Grid Current

Step-by-step guide to setting the maximum grid current on DLB boxes for 1-phase and 3-phase systems.

DLB Troubleshooting

Troubleshooting guide for DLB issues based on LED status, potential causes, and actions.

Solar DLB

About Solar DLB

Introduction to the Solar DLB for home and solar home use, managing PV power.

Solar DLB Model Selection

Comparison of Solar DLB models BCP-DLB-11M (single phase) and BCP-DLB-13M (three phase).

Solar DLB Modes Explained

Explanation of Pure PV, Hybrid, and Full Speed modes, plus Night Automatic Full Speed Mode.

How Solar DLB Works

Diagrams showing CT installation for 1-phase Solar DLB systems and how it operates.

Solar DLB Current Calculation

Explains current calculation for Solar DLB, considering grid, PV, and load power for 1-phase/3-phase.

Remote Inverter Installation Scenarios

Guides on setting DLB when PV CT cannot be installed due to inverter distance.

Solar DLB Installation

Details required accessories and network cable connections for installing the Solar DLB box.

Solar DLB Single-Phase Wiring

Illustrates voltage signal acquisition and CT clamp connections for single-phase Solar DLB.

Solar DLB Three-Phase Wiring

Illustrates voltage signal acquisition and CT clamp connections for three-phase Solar DLB.

Solar DLB Mode Switching

Instructions on switching between Solar DLB and Normal DLB, and between different Solar DLB modes.

Solar DLB Troubleshooting

Troubleshooting guide for Solar DLB issues based on LED status, potential causes, and actions.

ZJBENY BCP Series Specifications

General

Model	BCP Series
Output Voltage	12V/24V/48V DC
Charging Current	Adjustable, depending on model and battery type
Battery Type	Lithium-ion
Protection	Short circuit protection, Over temperature protection
Cooling Method	Fan-cooled
Dimensions	Varies depending on model
Weight	Varies depending on model