ZKHY ZK_RFID101 User Manual

UHF RFID Reader ZK_RFID101
User's Manual V2.0

ZKHY ZK_RFID101 Specifications

General

Brand	ZKHY
Model	ZK_RFID101
Category	Other
Language	English

Summary

1. COMMUNICATION INTERFACE SPECIFICATION

2. PROTOCOL DESCRIPTION

4. OPERATION COMMAND (CMD) SUMMARY

4.1 EPC C1 G2 (ISO18000-6C) COMMAND

Lists EPC C1 G2 commands (Inventory, Read Data, Write Data, etc.) and their functions.

4.3 READER DEFINED COMMAND

7. TAG MEMORY AND ISSUES REQUIRING ATTENTION

A. EPC C1G2 TAG (G2 TAG)

8. DETAILED DESCRIPTION OF OPERATION COMMAND

8.2 EPC C1G2 COMMAND

Details commands for EPC C1G2 tags.

8.2.1 Inventory

Details the Inventory command for EPC C1G2 tags, parameters, and response.

8.2.2 Read Data

Explains the Read Data command for tag memory (Password, EPC, TID, User).

8.2.3 Write Data

Details the Write Data command for tag memory, including parameters.

8.2.4 Write EPC

Details the Write EPC command for tag EPC memory, parameters, and response.

8.2.5 Kill Tag

Details the Kill Tag command, its parameters, and response.

8.2.6 Lock

Details the Lock command for memory banks, its parameters, and response.

8.2.7 BlockErase

Details the BlockErase command for tag memory, its parameters, and response.

8.2.8 ReadProtect (With EPC)

Details ReadProtect command for EPC G2 tags, its parameters, and response.

8.2.9 ReadProtect (Without EPC)

Details ReadProtect command without EPC for G2 tags, parameters, and response.

8.2.10 Reset ReadProtect

8.2.12 EAS Alarm

8.2.14 User Block Lock

8.2.15 Inventory (Single)

8.2.16 Block Write

8.4 READER-DEFINED COMMAND

8.4.1 Get Reader Information

8.4.2 Set Region

8.4.3 Set Address

8.4.4 Set Scan Time