More Setting
Basic Settings:
Flip Screen: Rotate the current monitoring image at 180 degrees.
Time Watermark: Choose whether the monitoring inter face
displays the real time watermark.
Talk Mode: To fit into the actual requirements, select the one-way
or two-way talk mode.
Messages: Check the specific logs of all the motion detection or video call.
Direction: Tap the buttons to rotate and set the camera's point of view.
PIR: The PIR can be enabled or disabled, or adjusted the sensitivity level as
required.
*Cloud: This Video Cloud Storage service is needed to pay for the
monthly or annually subscription. You could check the video from cloud
storage with this App anytime, anywhere. The cloud storage only supports
recording the events video clips.
Working Mode: Select the working mode between Power Saving Mode
and Continuous Mode.
Power Management Settings: Check the remaining battery level and the
power source, or set the threshold of the low battery alarm.
*Voice Control: To see live video from the Amazon Echo or Google Home
device, use Amazon Alexa or Google Assistant voice commands. This
feature is optional.
Offline Notification: It enables to receive the offline push message from
the camera.
Remove Device: Remember to REMOVE the device from the current
account when the owner of the camera changes.
12
Storage Settings: After inserting the Micro-SD card, you could check the
status of storage capacity.
To Next Page
Loading...