ELECTRICAL REQUIREMENTS
• This appliance must be supplied with 120V, 60 Hz, and it must be connected to
its own, properly grounded branch circuit that is protected by a 15 or 20 ampere
circuit breaker or time delay fuse.
• Wiring must be two wire with ground.
• If the electrical supply does not meet the above requirements, call a licensed
electrician before proceeding.
SPECIFICATIONS
Power requirements 120 V~60 Hz
Current 8.4 A
Water pressure Between 20 and 120 psi
Noise (dB) 45 dB
WARNING
Remove the house fuse or open the circuit breaker before beginning
the installation. Do not use an extension cord or adapter plug with
this appliance.
BEFORE INSTALLATION
7
Electrical Requirements
To Next Page
Loading...
