Why is my Zline DW-WM-18 Dishwasher not draining properly?
If your Zline Dishwasher isn't draining properly, the drain might be clogged. Check the air gap, if your dishwasher has one. If the dishwasher is connected to a disposer, make sure the disposer is empty. Also, ensure the drain hose is properly connected to the sink and is not kinked.
How to troubleshoot a Zline Dishwasher that won't start?
If your Zline Dishwasher won't start, it could be due to several reasons. First, ensure the power supply is properly connected. Second, check if the delay start option has been activated. Finally, if your model has a child lock feature, verify that it is deactivated.
Why are my dishes not clean enough after using my Zline DW-WM-18?
If your dishes aren't getting clean enough in your Zline Dishwasher, there are a few things to check. You may have low water pressure, so try again when the water pressure is normal. Ensure that the inlet water is hot. Also, make sure you are not loading the dishes too close together, and reload them according to the manual. Select a cycle that is suitable for the soil level. Finally, check if the spray arms are blocked and unblock them if needed.
How to remove spots and film from dishes in Zline Dishwasher?
If you're seeing spots and film on your dishes after using your Zline Dishwasher, the water may be too hard, consider installing a water softener. Improper dish loading can also cause this, so reload the dishes. Old rinse aid can also be the cause, so use fresh rinse aid. Also, make sure the rinse dispenser is full, so add rinse aid.
What to do if dishes are not drying in my Zline DW-WM-18 Dishwasher?
If your dishes are not drying in your Zline Dishwasher, make sure that the rinse aid dispenser is full. Also, improper dish loading can prevent drying, so reload the dishes according to the manual. Finally, the cycle you have chosen may not include drying, so select a different cycle that includes a drying function.
Why does my Zline DW-WM-18 Dishwasher take so long to complete a cycle?
If your Zline Dishwasher is running for too long, it could be due to a few factors. Ensure that the dishwasher is connected to hot water. The cycle time will vary according to soil level. The cycle will also increase when using the sanitize option.
Why is detergent left in the dispenser of my Zline DW-WM-18?
If there's detergent left in the dispenser of your Zline Dishwasher, the detergent may be too old, so use fresh detergent. Also, the spray arm might be blocked, so unblock the spray arms.
General| Style | built-in dishwashers |
|---|---|
| Color | white matte, matte white |
| Load Capacity | 16 |
| Number of Cycles | 6 |
| Options/Settings | energy save, quick wash, normal, rinse, eco wash, heavy wash, sanitary, high temperature wash, glass, heat dry option |
| Drying Type | heated drying |
| Noise level | 40 decibels adjusted |
| Control Type | touchpad |
| Delay Start | yes |
| Number of Racks | 2 |
| Sanitize Settings | no |
| Annual Energy Consumption | 234 kilowatt hours |
| Voltage | 120 volts |
Weight and Dimensions| Depth | 23 inches |
|---|---|
| Height | 32 1/2 inches |
| Width | 17 3/4 inches |
| Net Weight | 73.7 pounds |
To Next Page
