Zline Monument Series User Manual

3. If the door hits the tub, the dishwasher is not installed correctly. Adjust the leveling
legs to align the door to the tub.
Note: Keep the dishwasher level.
19
3
Note:
Keep the dishwasher level.
You’ll need:
Adjustable wrench
Level
Step 12: Securing the dishwasher to the countertop
• For countertops made of wood or materials that won’t be damaged by drilling, use Method 1.
• For countertops made of granite, marble, or other materials that could be damaged by drilling, use Method 2.
• If the gap between the control panel and the cabinet is less than 0.4 in. (10 mm), use Method 2.
Method 1
1 Insert the long top mounting clips into the slot.
2 Bend the brackets to secure them to the dishwasher tub.
3 Secure the dishwasher to the countertop through the holes in the brackets, using the screws provided.
IMPORTANT:
Drive the screws straight and flush. Protruding screw heads will scratch the top of the control panel and interfere with
the door closing.
Top mounting
clip
Screw
Turn the legs
to adjust the
level
If the edge of the door hits the side of the tub, the dishwasher is not installed correctly. Adjust the leveling legs to
align the door to the tub.
Phillips screwdriver
YOU’LL NEED
• Adjustable wrench
• Philips screwdriver
• Level
Turn the legs
to adjust the
level
INSTALLATION
23
Level the Dishwasher

Zline Monument Series Specifications

General

Brand	Zline
Model	Monument Series
Category	Dishwasher
Language	English