Zline MWD-1 - Page 19

14
1. Install the support beams using the holes in the front bracket as a guide. Use the
#1 screw.
2.
②
三、Install step 安装步骤
①
according to front bracket fixing hole marker the support
beam position.用记号笔根据前支架安装孔比对出支撑
横梁安装位置
② Use 1# Screw fi
xing support beam 使用长螺丝垂直安装
①
Remove the screw of microwave oven; Install the
front bracket and rear bracket 将微波炉原有螺丝
拆卸；将前支架、后支架安装上去
Complete chart 完成图
Remove the screws holding the microwave in place in order to install the front
bracket and rear bracket.
1
②
三、
Install step
安装步骤
①
according to front bracket fixing hole marker the support
beam position.用记号笔根据前支架安装孔比对出支撑
横梁安装位置
② Use 1# Screw fixing support beam 使用长螺丝垂直安装
①
Remove the screw of microwave oven; Install the
front bracket and rear bracket 将微波炉原有螺丝
拆卸；将前支架、后支架安装上去
Complete chart 完成图
②
三、
Install step
安装步骤
①
according to front bracket fixing hole marker the support
beam position.用记号笔根据前支架安装孔比对出支撑
横梁安装位置
② Use 1# Screw fixing support beam 使用长螺丝垂直安装
①
Remove the screw of microwave oven; Install the
front bracket and rear bracket 将微波炉原有螺丝
拆卸；将前支架、后支架安装上去
Complete chart 完成图
Trim Kit Installation
INSTALLATION Trim Kit