10
7
5
6
If this app interface appears, please
press “Tap here to select WiFi”.
If you see this screen, the app will
connect your Beam to your WiFi
network. This may take a few minutes.
Once it’s completed, please skip to
step 10.
If you do not see this screen, please
proceed to step 7.
Return to the Zmodo app page and
select or enter the SSID and password
of the WiFi network that you want your
Beam to connect to.
Note: The WiFi name and password are case-
sensitive.
Tap to proceed.
√
Note: If you are using an iOS device, you will need
to manually go to the WiFi settings page on your
smartphone.
To Next Page
Loading...