11
9
Select the WiFi network that your Beam
will connect to, and connect to it.
Return to the Zmodo app once your
mobile device is connected to the WiFi
network.
10
8
The app will automatically search for
your Beam and connect it to the WiFi
network. This may take a few
minutes.
Name your Beam and set a password
for it. Tap to proceed.
√
Note: The password provides an additional layer
of security for your devices. You will not need to
use this password when accessing your devices
from the Zmodo app. It is not required, but it is
highly recommended.
To Next Page
Loading...