ZP-NE14-S (sPoE)
Pins 1 and 6 are power, pin 1 is negative and pin 6 is positive. Pins 2 and 3 transmit
data to and from the camera.
**Please do not use this diagram to create a pinout for a separate power source for
the Simplified POE cameras. The cameras use a proprietary data communication
protocol, therefore the only way to power on the camera is to directly connect it to
one of the back ports on the the Simplified POE NVR.
Unique solution ID: #1333
Author: Amanda Mayer
Last update: 2015-03-30 12:21
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2023 Jeremy Schultz <itmanager@eptco.com> | 2023-01-06 10:46
URL: https://kb.zmodo.com/index.php?action=artikel&cat=164&id=333&artlang=en
To Previous Page
Loading...