Need help?Do you have a question about the Zodiac BT Series and is the answer not in the manual?
General| Type | Bluetooth Receiver |
|---|---|
| Audio Output | 3.5mm stereo jack |
| Frequency Range | 20Hz - 20kHz |
| Power Supply | 5V DC |
| Bluetooth Range | 10 meters |
| Dimensions | 45mm x 45mm x 15mm |
Steps to pair a BT headset with the radio, including PIN code setup and initiation.
Description of the B key as the Push-to-Talk button for transmitting.
Instructions on how to turn the radio on/off using the PWR/VOL knob and the auto-test sequence.
How to select channels, receive signals, and interpret LED indications.
Explanation of CTCSS filtering and the Monitor function for checking channel activity.
Procedures for transmitting using the PTT button and initiating channel scanning.
Guide to setting the squelch level from 0 to 10 for optimal signal reception.
How to configure VOX sensitivity for hands-free transmission based on environment.
Instructions for choosing between High (H) and Low (L) TX power output.
Procedure for locking and unlocking the keypad to prevent accidental key presses.
Detailed steps for activating, setting sensitivity, and deactivating the VOX function.
To Next Page