14 15
EN
Model: Teun Katrien
Max. Cutting area 300m 500m
Voltage 20V
No load speed 2800rpm +/- 100rpm
Cutting diameter 100m / 130mm
Cutting height 20-60mm
Max. slope % 35%
Narrowest possible passage 0,8 meter
Battery type/ mode Lithium-ion /2.0Ah LBF202E
Charging time 120 min
Charger type Input: 100-240V 50/60Hz, 28W
Output: 20.5V - 1.1A
IPX7
Robot protection IPX5
Charger protection IPX4
Noise <55dB
(200/14/EG amended on 2005/88/EG, Appendix III)
APP Wifi - Bluetooth 4.0
Accessoires
Boundry wire 100 m 130 m
Wire pegs 130 pieces 180 pieces
Charging base 1 piece
Battery pack 1 (LBF202E)
Charger 1 piece
Technical data and noise data
*Voltage measured at no load initial battery voltage reaches voltage maximum of 20
volts. Nominal voltage is 18 volts.
*a degree of noise from the machine is not avoidable. Route noisy work is to be
licensed and limits for certain periods. Keep rest periods, they may need
to restrict the working hours to a minimum. For their personal protection of
people working nearby, an appropriate hearing protection shall be worn.
*We recommend that you purchase genuine accessories listed in the above list from
www.zoefrobot.nl. Refer to the accessory packaging for further
details. Zoef Robot service can assist you and offer advice.
To Next Page
Loading...