To Next PageTo Next PageHow to clean milky white residue from Zojirushi Kettle?
If you notice milky white and rough-surfaced objects built up on the surface of the inner container of your Zojirushi Kettle, this residue is due to the mineral content in the water, not scale. Clean the inner container with citric acid to remove the buildup.
Why my Zojirushi Kettle power does not turn on?
If the Zojirushi Kettle power does not turn on, ensure the power plug is connected to an electrical outlet, the body is correctly set on the power base, and you have pressed the ON button. Also, check the connector for metal flakes or dust and remove them if present. If you've just finished boiling, allow the kettle to cool before pressing the ON button again. Make sure the kettle is filled with water before pressing the ON button.
Why does the Zojirushi CK-EAQ10 body become hot?
If the body of your Zojirushi Kettle becomes hot, it may be because the water temperature and/or room temperature is high. The outer surface of the body may reach up to 60°C under these conditions. This is not a malfunction.
Why is my Zojirushi CK-EAQ10 boiling so loud?
If your Zojirushi Kettle is boiling louder than usual, it may be due to the ingredients (minerals) in the water and scales accumulated on the surface of the inner container.
What to do if Zojirushi Kettle pours out from the spout?
If hot water pours out from the spout or steam vent of your Zojirushi Kettle, pour out the excess water until it is below the Maximum Water Level Line.
Why does the Zojirushi CK-EAQ10 Kettle power cord become hot?
The power cord of your Zojirushi Kettle may become hot while the water is boiling. This is not a malfunction.
How often replace the inner lid gasket of Zojirushi CK-EAQ10?
The inner lid gasket of the Zojirushi Kettle is replaceable, so please check it every year.
When should I replace the upper lid of my Zojirushi CK-EAQ10?
If the plastic part of the upper lid of your Zojirushi Kettle deteriorates over use, and discoloration occurs or the surface becomes coarse, replace the upper lid.
General| Material | Stainless Steel |
|---|---|
| Keep Warm Function | Yes |
| Water Level Indicator | Yes |
| Cordless | Yes |
| Voltage | 120 V |
| Auto Shut-off | Yes |
| Boil-dry Protection | Yes |
| Removable Filter | Yes |
| Cord Length | 30 inches |
| Capacity | 1.0 liters |
| Power | 700 W |
| Temperature Settings | 160°F, 175°F, 195°F, 208°F |
Key safety warnings to prevent injury and damage during use.
Important precautions to avoid minor injuries or product damage.
Critical operational guidelines for safe and proper product usage.
Step 1: Add water to the Inner Container before placing it on the Power Base.
Step 3: Plug in the kettle and press the ON button to start boiling.
Step 1: Press the lever and tilt the kettle to dispense hot water safely.
