EasyManua.ls Logo

Zojirushi CV-TYQ40 - User Manual

Zojirushi CV-TYQ40
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CV-TYQ_0120_E_20180329
20
VE HYBRID ELECTRIC
DISPENSING POT
SGPHKG
CV-TYQ40
BC
A
WARNING - THIS APPLIANCE MUST BE EARTHED
How to change the Fuse
If the Power Plug of your Power Cord (See P.4) is,
A. A type that can be disassembled. Refer to above.
B. A solid molded type that can not be disassembled. Please refer to the following.
1. Open the Fuse Cover of the Power Plug.
2. Replace the Fuse (13A) that is inside with a new Fuse. (Be sure to replace
with a 13A Fuse)
3. Fit back the Fuse Cover with the new Fuse to the Power Plug.
Do not connect the Fuse directly to the Power Plug. The Fuse
Cover can not be attached.
GREEN AND YELLOW
13 AMP FUSE
BROWN
BLUE
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow:Earth Brown:Live Blue:Neutral
If the colours of the wires in the mains lead of this appliance do not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows.
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be
connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured RED.
This appliance must be protected by a 13A fuse if a 13A (BS1363) plug is used
or, if any other type of plug is used, by a 10A fuse either in the plug or adaptor
or at the distribution board.
Caution
Power Plug
Fuse Cover
Fuse
(13A)
Fuse Cover
Always follow basic safety precautions when using electrical appliances.
Read all instructions carefully.
Please keep this instruction book on hand for easy reference.
INDEX
BOIL MODE
DISPENSE HOT WATER
DISPOSE WATER
AUTOMATIC SHUT-OFF FUNCTION
REBOIL MODE
HOW TO SET THE KEEP WARM MODE
QUICK TEMP MODE
ENERGY-SAVING MODE
ENERGY-SAVING TIMER FUNCTION
CAFÉ DRIP FUNCTION
HOW TO CHANGE THE INFORMATION
SOUND
6
8
8
9
9
10
12
13
13
14
14
IMPORTANT SAFEGUARDS
PARTS NAMES AND FUNCTIONS
2
4
HOW TO USE
BEFORE USE
USEFUL FUNCTIONS:
●
The average Keep Warm electric power consumption is for one hour, provided that the Inner
Container is full and the room temperature is approximately 23
｡
C.
●
The height refers to the product when the handle is down.
●
In high altitudes or severely cold areas, the product may not perform as specified. Avoid using the
product in such areas or in other extreme conditions.
●
This product is not suitable for use in countries or regions with different power supply voltages or
frequencies.
SPECIFICATIONS
CD-TYQ40
AC 220-230V 50/60Hz
640-700W
0.75 m
Approx.
24
W
Approx.
21
W
Approx.
17
W
Approx.
13
W
4.0 liters
98
｡
C
90
｡
C
80
｡
C
70
｡
C
Model No.
Capacity
Rating
Electric Consumption
Length of the Power Cord
Weight (including the Power Cord)
External Dimensions (approx. cm)
Average Power
Consumption
during Keep
Warm
21 (W) x 28.5 (D) x 35 (H)
Approx.
3.2
kg
Q&A ON PRODUCT USE
TROUBLESHOOTING GUIDE
SPECIFICATIONS
CLEANING AND MAINTENANCE
BEFORE CALLING FOR SERVICE
17
17
20
CLEANING AND MAINTENANCE
HOW TO REPLACE THE
INNER LID GASKET
15
15
REPLACEMENT PARTS
17
16
HOW TO CLEAN THE INNER
CONTAINER WITH CITRIC ACID
●

Table of Contents

Questions and Answers

  • W
    William HamiltonAug 17, 2025
    How to unlock Zojirushi CV-TYQ40 water dispenser?
    • T
      Tony WrightAug 17, 2025
      If the automatic dispense lock is activated, the Zojirushi Kitchen Appliance will not dispense water properly. To resolve this, press the UNLOCK button, and then press the DISPENSE button.
  • L
    Lindsey MillerAug 20, 2025
    What to do if Zojirushi CV-TYQ40 Kitchen Appliances displays "HH"?
    • M
      Maria HartmanAug 20, 2025
      If you see "HH" on the display of your Zojirushi Kitchen Appliance, accompanied by a beep and 3 lit lights, it means the inner container is low on water, or hot water was added, triggering the automatic shut-off. Unplug the power plug and wait for the inner container to cool down. Then, add water and plug the power cord back in.
  • M
    Manuel MartinezAug 22, 2025
    Why can't I select Quick Temp mode on my Zojirushi CV-TYQ40 Kitchen Appliances?
    • L
      lhaleAug 23, 2025
      The quick temp mode cannot be selected if the 98°C keep warm mode or vacuum insulation keep warm mode is currently selected on your Zojirushi Kitchen Appliances. Select the 90, 80, or 70°C keep warm mode first, and then select the quick temp mode.
  • M
    Matthew WrightAug 26, 2025
    What to do if Zojirushi CV-TYQ40 pours water by itself?
    • P
      patrick61Aug 26, 2025
      If water is pouring out by itself from the spout or steam vent of your Zojirushi Kitchen Appliances, it is likely that the inner container is filled over the maximum water level line. Pour out the excess water until it is below the maximum water level line.
  • A
    Aaron RodriguezAug 28, 2025
    Why is my Zojirushi Kitchen Appliances showing a rotating square?
    • I
      Ian MunozAug 28, 2025
      If 2 lights blink at the same time and the display shows a rotating square on your Zojirushi Kitchen Appliances, it means you've accidentally started the citric acid cleaning cycle by pressing the REBOIL/QUICK TEMP button for 3 seconds or more. To cancel it, unplug the power plug, wait more than 5 seconds, and then plug it back in.
  • V
    Vincent KnightAug 30, 2025
    Why is my Zojirushi CV-TYQ40 Kitchen Appliances not pouring hot water properly?
    • D
      Danielle AndersonAug 30, 2025
      If hot water does not pour properly a few minutes after boiling in your Zojirushi Kitchen Appliances, it may be due to scale or other residue accumulated on the inner container and filter. Clean the inner container and filter.
  • T
    Theresa HenrySep 2, 2025
    Why does Zojirushi CV-TYQ40 cool down quickly in keep warm mode?
    • W
      William RussellSep 2, 2025
      If water cools easily during Vacuum Insulation Keep Warm mode on your Zojirushi Kitchen Appliances, it may be because the amount of water kept warm is too low. Add water (below the Maximum Water Level Line) and press the REBOIL/QUICK TEMP button.
  • E
    Eric BrownSep 5, 2025
    Why is there residue in my Zojirushi CV-TYQ40?
    • C
      Carolyn MarquezSep 5, 2025
      If you notice a filmy, floating residue in your Zojirushi Kitchen Appliances, it's due to the mineral content in the water. It's not from corrosion of the inner container or peeling of the nonstick coating.
  • D
    Donna LyonsSep 8, 2025
    How to make Zojirushi CV-TYQ40 Kitchen Appliances boil water?
    • J
      Joseph WilliamsSep 8, 2025
      If water does not boil in your Zojirushi Kitchen Appliances, press the REBOIL/QUICK TEMP button and select the regular Boil mode.
  • J
    jack83Sep 12, 2025
    Why does Zojirushi CV-TYQ40 have red spots inside?
    • C
      Christopher EllisonSep 12, 2025
      Red rust-like spotting appearing on the surface of the inner container of your Zojirushi Kitchen Appliances is caused by iron in the water and is not a sign of deterioration of the inner container.

Zojirushi CV-TYQ40 Specifications

General IconGeneral
BrandZojirushi
ModelCV-TYQ40
CategoryKitchen Appliances
LanguageEnglish

Related product manuals