Need help?Do you have a question about the ZONHAN CM30D series and is the answer not in the manual?
General| Output Waveform | Pure Sine Wave |
|---|---|
| Protection Level | IP20 |
| Cooling Method | Forced Air Cooling |
| Model | CM30D series |
| Rated Power | 30kW |
| AC Output Frequency | 50Hz/60Hz |
| Output Power | 30kW |
| Frequency Range | 50Hz/60Hz |
| Communication Interface | RS485 |
Explains the meaning of various graphic symbols displayed on the LCD screen.
Details the functionality of each button on the controller interface for navigation and control.
Explains how to view and adjust various operational parameters of the controller.
Guides on how to view and adjust the controller's floating charge voltage setting.
Details how to configure the recovery voltage threshold for under-voltage protection.
Explains how to set the under-voltage protection level to prevent battery deep discharge.
Covers setting different operational modes for the load output based on time or light.
Guides on selecting and configuring the correct battery type for optimal charging.
Addresses issues related to low battery voltage protection and how to resolve them.
Explains overload and short circuit protection and provides solutions for recovery.
Describes battery overvoltage protection and necessary actions to take.
To Next Page