Bluetooth
®
USB Adapter Quick Start Guide
Setup for Windows XP/2000/Me/98SE
1. Do not plug the Bluetooth USB Adapter into your computer. You need to
install the software first.
2. Insert the installation CD into the CD drive. The CD should start
automatically and the Language Selection screen should appear. (If it does
not, double-click the My Computer icon on your desktop and then, in the
My Computer window, double-click the Zoom icon.)
3. In the Language Selection window, choose your language.
4. In the next window, select Installation Wizard then choose Bluetooth USB
Adapter.
5. Follow the prompts to install the software. Note: You can accept the
licensing agreement when prompted.
6. Windows XP/2000 users only: If the Driver Signature Notice message
box appears, click OK.
7. When prompted, plug the Bluetooth USB Adapter into your computer’s USB
port. (If it’s helpful, you can connect the supplied USB cable between the
USB Adapter and the USB port.) Then click OK to continue the installation.
8. When the installation is complete, click Finish, then Yes. Your computer will
shut down and restart.
9. To use your Bluetooth USB Adapter with another Bluetooth device, you need
to set up the service for that device using the Bluetooth Settings. See the
Bluetooth USB Adapter User Guide on the installation CD for directions.
Setup for Macintosh
For Mac OS X (10.3 and later), you do not need to install any software. To install
the Bluetooth USB Adapter, plug the the Adapter into your computer’s USB port.
(If it’s helpful, you can connect the supplied USB cable between the USB Adapter
To Next Page
Need help?
General
