Managing patches
Saving patches
Patch changes can be saved to the same patch, overwriting it. They can also be saved to a patch with a dif-
ferent number.
1.
Press .
This opens the SETTING screen.
2.
Press .
This opens the SAVE screen.
3.
Use , and – .
Select the destination patch number.
Function Operation
Select previous patch
Press
Select next patch
Press
Select patch numbers 10 – 19
Press
Select patch numbers 20 – 29
Press
Select patch numbers 30 – 39
Press
Select patch numbers 40 – 49
Press
Select patch numbers 50 – 59
Press
23
To Next Page
Loading...