First steps and information
Carefully read this manual.
The zoopa Q 165 is a RTF (Ready-to-Fly) model.
For the activation, you only need 4pcs. of 1.5V AA Mignon batteries for the controller.
ACME the game company GmbH assumes no liability for privacy violations, personal injury and
damage to private property caused by the user of the model.
Please follow carefully the instructions in this guide step by step, to ensure proper handling.
Charging the battery
The LiPo battery will be charged through the supplied charging module.
Connect the charger with a 220V output, the LED on the charger will light up in red.
Connect the LiPo battery to the charging module. Check the polarity and that it is connected firmly.
The white plug provides a direction lead.
.
Charging takes between 30 and 45 minutes. As soon as the battery is fully charged, the LED will shine
permanently.
Please only use the original batteries, as other products may have another polarity!
To Next Page
Loading...