The Zopec Explore Oxygen (Model 21160KC) is a professional-grade portable battery designed as a universal CPAP, BiPap, and oxygen battery, offering uninterrupted power and UPS protection against outages. It is marketed as a "Professional Sleep Guardian" and is suitable for home respiratory care, ensuring users do not lose sleep due to power interruptions.
Function Description:
The primary function of the Zopec Explore Oxygen is to provide a reliable power source for CPAP, BiPap, and oxygen concentrator machines, particularly during power outages or for use in areas without direct access to wall power. It features Platinum Level UPS Technology, which allows it to automatically switch to battery power instantly when a power outage occurs, ensuring continuous operation of connected devices without interruption. This UPS capability also supports the use of heated humidifiers and heated tubes, such as those found in ResMed AutoClimate Control systems. When plugged into a wall outlet, the battery operates in a pass-through (bypass) mode, drawing power from the wall for the connected device and keeping the battery at 100% charge as standby power. This design prevents damage to the battery life even when plugged in 24/7. The device is equipped with two 110V AC outlets, making it compatible with all machine brands and models without the need for special adapters, inverters, or voltage matching. It can also power other devices up to 250W, including Mac/PC laptops, internet modems, phones, tablets, and lights. The battery utilizes "Unlimited Linking Technology," allowing users to connect multiple batteries to increase overall capacity and extend run time indefinitely.
Important Technical Specifications:
- Model: 21160KC
- Dimensions (L x W x H): 10.25" x 6.25" x 3.25" (in)
- Weight: 7.5 lb
- Capacity: 576 Wh / 160 Ah (equivalent to approximately two car batteries)
- AC Output: 250W (110V/60Hz)
- Working Temperature: 32 - 115°F (0 - 45°C)
- USB-C Output (1 port): 15W (5V/3A)
- USB-A Output (2 ports): 17W (DC 5V, 3.4A)
- Fast Car Charger Input/Output: Input: 12V DC, Output: 24V DC
- Universal Wall Charger Input: 100-240V, 50/60 Hz
- Recharge Time: 12 hours or less
- Cooling: Solid State Peltier Cooling (100% silent, no cooling fans)
- Battery Cells: Panasonic Lithium Ion Cells (same brand as Tesla vehicles)
- FAA/TSA Compliant: No (capacity of 576 Wh exceeds the 160 Wh limit for Lithium Ion batteries for air travel)
Usage Features:
- Easy Setup: To use, the battery must first be turned on by pressing and holding the Battery ON/OFF Switch until the Digital Capacity % LED Display turns on. Then, the AC Outlet Switch is slid to ON, and the Red LED light of the AC Outlet Indicator turns on. Devices can then be plugged in.
- Digital Capacity Display: A Digital Capacity % LED Display shows the remaining battery charge, with "FF" indicating 100%.
- Multiple Charging Options: The battery can be recharged using the included universal wall charger, a fast car charger, or an optional solar panel charger. All chargers connect to a dedicated Recharging Port.
- Heated Humidifier/Tube Management: The manual provides detailed instructions for turning off heated humidifiers and heated tubes on popular CPAP machines (e.g., ResMed AirSense 10, Philips Respironics DreamStation) to maximize battery run time. Using both heated humidifier and heated tube can reduce run time by 75-80%.
- Run Time Estimation: The manual includes tables estimating CPAP run times for various brands and models under different conditions (heated humidifier/tube OFF, heated humidifier ON at mid-level/heated tube OFF, and both ON at mid-level). For BiPap machines, run times are reduced by approximately 20%.
- Linking Technology: Multiple Zopec Explore Oxygen batteries can be linked together to achieve extended run times. The CPAP machine must be plugged into the first battery in the link, and power will be drawn from all linked batteries.
- Safety Features: The battery includes safety features for over current, over voltage, and over temperature protection. It is designed to be safe for placement under a bed or on the floor, provided it is vented if placed in a drawer.
- Electrical Sparks: Occasional sparks when plugging into the recharging port or AC outlet are normal and due to static electricity. Grounding oneself by touching a large metal surface before plugging in can help avoid this.
Maintenance Features:
- Initial Charge/Battery Reset: Before first use, the battery should be charged to 100% (LED = FF). If charging issues occur, a deep discharge (running a CPAP with humidifier until it turns off) can reset the battery.
- Monthly Charging: For maintenance, the battery should be fully charged to 100% (LED = FF) monthly.
- Troubleshooting: The manual provides guidance for common issues such as the battery not charging or not holding charge (suggesting a deep discharge reset) and reduced run time (emphasizing proper management of heated humidifier/tube settings).
- Warranty: Zopec Explore Batteries come with a 1-year limited warranty, covering defects in material and workmanship from the date of purchase. The warranty does not cover user negligence, such as water, physical, or disassembling damages.
Need help?
General
To Next Page