Quick Start Guide
PROFESSIONAL SECURITY MADE EASY
Statement
Thank you for purchasing this product. ZOSI is committed to providing our customers with a high quality, reliable
security solution. ZOSI cannot assume responsibility for any consequences resulting from the use thereof.
Before Installation
This product may require cabling. It is strongly suggested to test all products and parts before installation and cabling.
Applications
The system is a standalone system. It need to connect with any monitor to start live view (Such as PC monitor, TV etc.)
By adding a 3.5” SATA hard drive to the NVR, you can record&playback videos.
By connecting the NVR to the Internet, you can view the cameras anywhere anytime.
Tips
This instruction is used to guide you install the system and remote surveillance. More instructions and details please
contact us.
Tech Support
Website: www.zositech.com Email: service@zositech.com
Camera
Antennas
interface
Camera
Video inputs
Router
Power
Monitor/TV
Mouse
Within seconds, you should see cameras’ image live view on screen.
Default ID:
admin
Password:
: None (means empty, no need to input anything, just click login)
Tips:
To protect your privacy, please right click the mouse > Go to System Setup > System Admin > User > set password to
change your password.
Step 1: Connect the NVR to the Internet
Connect the NVR’s WAN port to the Internet(ex. router) with an Ethernet cable. When the NVR is connected to the
Internet within minutes, you should see the Cloud ID and status shows "ONLINE" on the right bottom corner on your
screen.
Step 2: Download the App
Search "IP PRO" or "EseeCloud" in App store or Google Play. Or Scan the QR Code to download the App.
Step 3: Run the App
A: Install the free App.
B: Tap Register and enter your User name, Password,Email to create a new account.
C: Login the App, Tap “+” icon on the right upper corner of the screen > Add device by ID.
D:Configure the following
E: Tap the channel Number to connect the camera,then you shall see the live view of the cameras
1. Cloud ID: This Cloud ID can be found at right bottom corner of your monitor.
2. Descriptions: Choose a name for your system of your choice.
3. User Name: Enter the NVR’s User Name (default: admin)
4. Password: Enter the NVR’s Password (default: No password required, just leave blank)
5. Tap Submit.
Tips:
If the status does not change to “ONLINE”, please go to System Setup > Network Setup> enable the DHCP or manually
allocate IP for the NVR. If it does not go ONLINE after these settings, please contact your network administrator for help.
(Ex.: port 80 need to be opened on the router.)
Install the antennas for cameras and NVR.
Plug cameras to power (smaller 12V 1A power adapter).
Connect the NVR to Router with an Ethernet cable.
Connect a screen to the NVR via its HDMI or VGA port (HDMI and VGA cable not included).
Plug the mouse (included) to USB port at the rear panel of NVR. You shall then be able to operate with the mouse.
Plug NVR to power (bigger 12V 2A power adapter).
IP Camera Video inputs: Just in case any of your camera is out of WiFi range, you can connect that camera to these
ports with an Ethernet cable.
1. Connecting your system
2. View on Mobile
4
5
7
6
3
3
1
2
4
5
6
7
IP Pro
App store Google play
3. View on PC Client Software
Step1: Download the CMS software and install it on your computer.
Please go to https://www.dropbox.com/sh/k9irglynkzpfhby/AABJUDKkaLdHDAN1FzalYlNja?dl=0 download the PC Client
Software – CMS.
Step2: Open it, go to Settings > Device manage > Add device. Choose add device by ESee ID.
Esee ID : same as Cloud ID
Username: Enter the NVR’s User Name (default: admin)
Password: Enter the NVR’s Password (default: No password required, just
leave blank)
Device name: same as the IP Pro account Descriptions in smartphone
Channels: same as your NVR’S channel
1
2
3
4
5
Network Video Recorder
Network Video Recorder
Network Video Recorder
Network Video Recorder
Network Video Recorder
Cloud ID:662023312 ONLINE
Cloud ID:662023312 ONLINE
1. When your PC is in the same LAN with the NVR (normally means they are connected to the same
router).
Step1. Find the IP address and Web port # of your NVR (IP address can be found in System Setup > Network
Setup).
Step2. Enter the NVR’s IP address in your IE browser in format http://youripaddress, for example:
http://192.1.1.100 (If the default WEB port 80 has been changed e.g. to 100, you’ll need to add new port number
when input IP address in the browser, for example: http://192.168.1.100:100).
User Name: Enter the NVR’s User Name (default: admin)
Password: Enter the NVR’s Password (default: No password required, just leave blank.)
4.View on PC via IE
e
Step3: Click Preview to return to live view interface, you shall see the device was successfully
added and listed on right. Click device name to view the cameras’ live video. You may need to wait
some seconds for the system to connect.
To Next Page
Need help?
General