Need help?Do you have a question about the ZOTEK ZT100 and is the answer not in the manual?
General| Continuity | Yes |
|---|---|
| Diode Test | Yes |
| hFE Test | Yes |
| NCV | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Power Off | Yes |
| Frequency | 10Hz-10MHz |
| Temperature | -20℃~1000℃/-4℉~1832℉ ±(2.5%+5) |
Explains the symbols and indicators on the multimeter's LCD screen for various functions and states.
Description of the HOLD button for freezing readings and the backlight function.
Details on using the SELECT button for mode toggling and relative measurements.
Instructions for turning off the product and its automatic power-off feature.
Guide for setting the rotary switch for AC voltage measurements up to 1000V.
Guide for setting the rotary switch for DC voltage measurements up to 750V.
Details on measuring resistance and performing continuity tests with the multimeter.
Instructions for measuring frequency and duty cycle using the multimeter.
Guidance on measuring AC/DC current in Amperes and milliAmperes.
Description of the input terminal for AC/DC current measurements up to 10A.
Explanation of the common (return) terminal used for all measurements.
Details on the input terminal for voltage, resistance, capacitance, frequency, duty cycle, diode, and current measurements.
Step-by-step guide on how to measure AC and DC voltage using the multimeter.
Instructions for measuring AC and DC current, including terminal selection and AC/DC toggling.
Procedure for measuring resistance, including necessary precautions and display indicators.
How to perform a continuity test, including beeper indication for short circuits.
Steps to test diodes, including probe connection and interpreting results like 'OL'.
Guide on how to measure capacitance, including capacitor connection and reading stabilization.
Instructions for measuring frequency, noting voltage applicability for high-frequency measurements.
Procedure for measuring the duty cycle of a signal, including rotary switch and SELECT button usage.
Guidelines for cleaning the multimeter safely and effectively using appropriate materials.
Step-by-step instructions on how to replace the multimeter's batteries when the low battery indicator appears.
Procedure for replacing blown fuses in the multimeter, including safety precautions.
Details on the multimeter's general features like display, ranging, material, and auto power off.
Information on the multimeter's dimensions, weight, and battery type.
Specifies the operating and storage temperature and humidity ranges for the multimeter.
Details on the range, resolution, and accuracy for DC and AC voltage measurements.
Presents the range, resolution, and accuracy for current, resistance, and capacitance measurements.
Lists the range, resolution, and accuracy for frequency, duty cycle, diode, and continuity functions.
To Next Page
