Need help?Do you have a question about the ZOTEK ZT219 and is the answer not in the manual?
General| Display | 6000 counts |
|---|---|
| Diode Test | Yes |
| Continuity | Yes |
| Auto Power Off | Yes |
| DC Current | 10A |
| AC Current | 10A |
| Frequency | 10MHz |
| Duty Cycle | 0.1% to 99.9% |
| Temperature Range | -20℃ to 1000℃ ±(1.0%+3) |
Essential guidelines and precautions to ensure safe operation and prevent personal injury or damage.
Freezes display reading or controls backlight; push again to resume or turn off.
Measures resistance, performs continuity tests, and tests diodes using dedicated rotary switch positions.
Measures frequency and duty cycle for low voltage applications.
Measures DC and AC current in Ampere, milliampere, and microampere ranges.
Step-by-step guide on how to connect and measure AC/DC voltage using the multimeter.
Detailed instructions for measuring AC and DC current, including terminal selection and circuit connection.
Procedure for measuring resistance, including probe placement and safety precautions.
Steps to perform a continuity test, which uses a beeper to indicate low resistance.
Procedure for testing diodes to check their forward bias voltage drop.
Instructions for measuring capacitance, including probe connection and reading stabilization.
Guide to measuring frequency using different rotary switch positions for high and low voltage scenarios.
Procedure for safely replacing the batteries when the low battery indicator is displayed.
Steps to replace blown fuses, including removing covers and using compatible fuse types.
Accuracy, range, and resolution for DC voltage measurements.
To Next Page
