Zowill DK09 - Programming Guide

Support to add 13.56MHz
cards, such as mifare card,
NFC card, Desfire card and
EV1 card.
Notes:
Programming Guide
The default Master Code is 123456.
It is required that you change it to a code of
your own before programming.
IMPORTANT:
3 beeps 3 beeps
Change
Master Code
2 Long beeps+2 Green
light flash
3 beeps
Master Code +
3 beeps
Master Code +
New Master Code +
Same New Master Code +
1 2
3 beeps 3 beeps
Add User
Code
2 Long beeps+2 Green
light flash
3 beeps
Master Code +
New User Code + Same New User Code +
8 0
Master Code +
3 beeps
Delete All
User Card
6 9
2 Long beeps+2 Green
light flash
3 beeps
Add User
Card
1 Long beep +1 Green
light flash
Scan User Card
8 0
19