ZPA Pecky, a.s. MODACT MONEDJ - Dimensional Sketch of Electric Actuators MODACT MONED, MOPED, MONEDJ

30
Dimensional sketch of electric actuators MODACT MONED, MOPED
Type No. 52 030 – 52 035 (version with terminal board)
ø H
A
97
C
J
K
E
G
F
Non-passable (push-through) holes for motors of axial dimension 100, 112, 132 bushing M32x1.5 range ø 13 – 20 mm (enclosed)
Local control
External protective
terminal
Dimensional sketch of electric actuators MODACT MONED, MOPED
Type No. 52 036 (version with terminal board)
External protective
terminal
Non-passable (push-through)
holes bushing M32x1.5 range ø 13 – 20 mm (enclosed)
Local control
A
328
B
484
342
178
926
ø 375
Threads or bushings
1x cable bushing for motors of axial dimensions 71, 80, 90 – M25 x 1.5 range ø 9 – 16 mm
Threads or bushings
Note: For actuators MODACT MONED, MONEDJ, the switchboard box has threads for bushings:
3 x thread M20 x 1.5; 1 x thread M25 x 1.5 (the bushings are included in the delivery - wrapped-together part).
For actuators MODACT MOPED, the switchboard box has bushings: 1 x M25 x
1.5, range of Ø 13 – 18 mm; 2 x M20 x 15 range of Ø 10 – 14 mm; 1 x M20 x 1.5 range of Ø 6 – 12 mm.
The electric motor (except for the actuator version with the motor interconnected with the switchboard box) is always delivered with cable bushing. Connector Harting is always fitted with cable bushings.
A B C D E F G ø H J K 305 90 300 76 334 258 592 160 99 120 376 120 328 92 436 258 694 200 - 144 455 145 387 123 519 288 807 250 - 190 540 178 445 153 598 298 328 926 - 234
Type designation
52 030.xxxxNED
52 031.xxxxNED 52 032.xxxxNED 52 033.xxxxNED 52 034.xxxxNED
52 035.xxxxNED
52 036.xxxxNED
shape A
52 036.xxxxNED
shape B
1
, C, D, E
Type designation
A B 785 463 740 418