Need help?Do you have a question about the ZSK SPRINT and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Weight | 45 kg |
| Power Supply | 230V, 50/60 Hz |
| Embroidery Field | 360 x 200 mm |
| Speed | 1, 000 stitches per minute |
| Machine Weight | 45 kg |
| Power Requirement | 230 V, 50/60 Hz |
| Stitch Length | 0.1-12 mm |
Covers safety instructions, warnings, and general operational safety.
Precautions regarding magnetic hoops, pacemakers, and damage to electronics.
Safety during operation, work practices, cleaning, and repairs.
Procedures for safely unloading and handling the machine from its packaging.
Guidance on safely moving the machine to its final setup area.
Guidance on compliant disposal of packaging materials.
Steps for setting up the machine on a stable surface and ensuring it is aligned.
Instructions for assembling the optional machine stand.
Steps for installing and connecting the machine's control unit.
Checking voltage and safely connecting the machine to the power supply.
Information on fuses and circuit breakers as safety devices.
Identification of key components and parts of the embroidery machine.
Operation of the main switch and emergency stop functions.
Detailed explanation of the control unit's keys, LEDs, and functions.
Procedures for aligning the pantograph using arrow keys and control unit.
Procedures for converting to tabletop embroidery mode.
Steps for converting between tubular, tabletop, and cap embroidery modes.
Methods for securely clamping embroidery material in frames.
Specific steps for preparing material for tubular system embroidery.
Covers safety instructions, warnings, and general operational safety for J/RACER series.
Precautions regarding magnetic hoops, pacemakers, and damage to electronics for J/RACER series.
Safety during operation, work practices, cleaning, and repairs for J/RACER series.
Procedures for safely unloading and handling the machine from its packaging for J/RACER series.
Guidance on safely moving the machine to its final setup area for J/RACER series.
Guidance on compliant disposal of packaging materials for J/RACER series.
Steps for setting up the machine on a stable surface and ensuring it is aligned for J/RACER series.
Information on machine variants and applying caster brakes for J/RACER series.
Steps for installing machine shoes on J/RACER series variants without casters.
Checking voltage and safely connecting the machine to the power supply for J/RACER series.
Information on fuses and circuit breakers as safety devices for J/RACER series.
Identification of key operating controls and indicators on the machine.
Operation of the main switch and emergency stop functions.
Detailed explanation of the control unit's keys, LEDs, and functions.
Procedures for aligning the pantograph using arrow keys and control unit.
Procedures for converting the machine to tubular system embroidery mode for J/RACER series.
Instructions for moving and adjusting work tables for different modes for J/RACER series.
Steps for converting between tubular, border frame, and cap embroidery modes for J/RACER series.
Methods for securely clamping embroidery material in frames for J/RACER series.
Specific preparation steps for border embroidery and other types for J/RACER series.
Safety precautions to take before performing any cleaning or maintenance.
Recommended lubricants for machine maintenance and their specifications.
Troubleshooting table for common faults and their remedies.
To Next Page
