EasyManua.ls Logo

Zte Blade A51 - Security; Protecting Your Phone With Screen Locks; Connecting to Networks; Connecting to Wi-Fi

Zte Blade A51
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case,
try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on
the phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
Press and hold the Power key to turn on your phone.
To power off, press and hold the Power key to open the options menu, and touch >
NOTE:
If the screen freezes or takes too long to respond, try pressing and holding the Power key for over 10 seconds to
restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save
power and the keys are locked to prevent accidental operations.
You can wake up your phone by turning on the display and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a fingerprint, an unlock pattern, a PIN or a password for your phone, you’ll need to use your
fingerprint, draw the pattern, or enter the PIN/password to unlock your screen.
Product Safety Information

Other manuals for Zte Blade A51

Related product manuals