5
Insertion of SIM Card and Memory Card
The SIM card can be installed or removed while the phone is turned on.
First, insert the needle of the SIM card tray ejection tool into the hole next to the card tray.
Do not replace the included tool for any other sharp objects in order to prevent damage to
your device.
Pull out the card tray and place the Nano SIM cards and the MicroSDXC card (optional) on
the tray, as shown in the picture below. Carefully slide the tray back into its place.
Note: If two Nano SIM cards are installed, both cards can connect to the 4G, 3G and 2G
networks, and either card can be used for mobile data.
To Next Page
Loading...
