Zte N9137 - Connecting to Wi-Fi

53
Checking Access Point Names
You can use the default Access Point Names (APNs) to
connect to the Internet. Swipe up from the bottom of the home
screen and tap
Settings > Mobile networks > Access Point
Names
to check the default APN.
NOTE:
To set the APN to default settings, tap
> Reset to
default
.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide
Internet access at distances of up to 300 feet (100 meters),
depending on the Wi-Fi router and your surroundings.
Turning Wi-Fi On and Connecting to a Wi-Fi Net-
work
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi
.
2. Slide the
Wi-Fi
switch to the
On
position to turn on Wi-
Fi.
3. Tap a network name to connect to it.
4. If the network is secured, enter the password and tap
CONNECT
.