Zte N9137 - Page 56

56
Method one: WPS button (Recommended)
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi
.
2. Slide the
Wi-Fi
switch to the
On
position.
3. Tap
> Advanced > WPS Push Button
.
4. Press the WPS button on the wireless router and the ac-
cess point will recognize your phone and add it to the net-
work.
Method two: PIN
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi
.
2. Slide the
Wi-Fi
switch to the
On
position.
3. Tap
> Advanced > WPS Pin Entry
.
4. The WPS PIN displays on the screen. Enter the PIN into
the access point's setup page.
After entering the PIN, your phone automatically nds the ac-
cess point and congures the connection.
NOTE:
For detailed information about the WPS feature of the
access point, please refer to its documentation.