20
Scan other devices and pair with them
1. On the home screen, select “Settings” > “Bluetooth”.
2. Touch the switch to turn on Bluetooth.
3. Your phone shall automatically scan the nearby Bluetooth devices. Select one
device.
4. Touch “Pair” to pair with two devices. Or input the Bluetooth password and
then touch “OK”.
After the paring request is accepted by other device or the same password is
entered, the pairing is completed.
5. After paired, these two devices can communicate within short distance.
Send data via Bluetooth
You can send music, sound recordings, videos, calendar events, contacts, etc.
via Bluetooth. The operation process depends on what you send.
Below is an example of sending an image via the Bluetooth.
1. On the home screen, touch “Gallery”.
2. Open the image you want to send.
3. Select “Share” > “Bluetooth”.
4. If there is a prompt “Turn on Bluetooth now?” on the screen, touch “Enable”.
5. Select paired device or select one device from the scanning list to pair and
send the file.
Receive data via Bluetooth
1. Turn on Bluetooth and enable Bluetooth detection.
2. Show the notification panel, touch the Bluetooth share notification and touch
“Accept” to receive the file.
3. After the file is received, the phone shall display the notification. If you want to
view the file, show the notification panel and touch the relevant notification.
To Next Page
Loading...
