Zte nubia Z50S Pro - Setting Up Your Phone

6
Setting Up Your Phone
The nano-SIM cards can be installed or removed while the
phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind of
SIM cards, or any non-standard nano-SIM card cut from a SIM
card. You can get a standard nano-SIM card from your service
provider.
1. Insert the tip of the tray eject tool into the hole on the
card tray.
2. Pull out the card tray and place the nano-SIM card(s)
into the card slot(s) as shown. Carefully slide the tray
back into place.
NOTE:
Please use the tray eject tool included in the box. Otherwise
the card tray may not be ejected.
CAUTION:
Never replace the included tray eject tool with sharp objects.
Ensure that the tray eject tool is perpendicular to the hole.
Otherwise, the phone may be damaged.
NOTE:
If two nano-SIM cards are installed, both cards can connect
to the 5G network, and you can use either card for mobile
data.