… Care and maintenance
61
Descaling
Whenever steam is produced, depending on the hardness of the local water
supply (i. e. the limescale content of the water), limescale is deposited in the
boiler.
The appliance automatically recognises when descaling is necessary.
– flashes in the digital display.
The time interval between descaling depends on the hardness of the water
and frequency of use. If steaming 4 × 30 minutes per week, the appliance
must be descaled – depending on water hardness – roughly as follows:
We recommend that the appliance be descaled whenever the warning
appears in the display.
Failure to descale the appliance will likely impair the functioning of or cause
damage to the appliance.
Water hardness Descale after about
䡲 Soft
18 months
䡲 Medium
9 months
䡲 Hard
6 months
Descaling takes about 45 minutes.
To Next Page
Loading...
Need help?
General
