24
Glowing White: Not Set Up
This mode identifies that the plug is powered properly, but has not been setup and added to
a place. You should only see this mode if you are setting up a Smartplug for the first time.
Blinking White: Currently Setting Up
This mode identifies that you are currently setting up this plug in the Zuli App. When you plug
in multiple Smartplugs and are setting up each one individually, this mode let’s you identify
which plug you are setting up.
Solid White: On Mode
This mode identifies that the plug is working properly and set up on a network, and is in the
“ON” position.
LED Off: Off Mode
This could indicate either the plug is in off mode or is not properly powered. If neither of
these cases are correct, please contact Zuli support.
Red LED on: Problem has Occurred
This indicates there is a problem with the Smartplug. Try unplugging and replugging. If it is still
red, try factory resetting the plug as detailed in Safety below. If still red, please contact Zuli
support.
SPECIFICATIONS
What do the LED lights mean?
To Next Page
Loading...