ZUMI WS1 PRO - Table of Contents

TABLE OF CONTENTS
1 Safety ······················································································································ 1
1.1 Symbol Guide ···································································································· 1
1.2 General Safety ··································································································· 1
1.3 Designated Use ·································································································· 2
1.4 Electrical Safety ································································································· 2
1.5 Gate Requirements····························································································· 3
1.6 Entrapment Countermeasures ·············································································· 3
2 About the Product ···································································································· 5
2.1 Package List ······································································································ 5
2.2 Specications ···································································································· 7
3 Installation ·············································································································· 8
3.1 Typical Installation Overview ··············································································· 8
3.2 Pre-Installation Check ························································································· 10
3.3 Push-to-Open Installation (PSO) ·········································································· 11
3.3.1 Locating the Center Line ············································································ 11
3.3.2 Post Bracket Pre-Assembly and Location ······················································ 13
3.3.3 Mounting the Post Bracket ········································································· 15
3.3.4 Connecting the Actuator ············································································ 16
3.3.5 Mounting the Control Box ·········································································· 17
3.3.6 Wiring the Actuator ··················································································· 19
3.3.7 Mounting the Front Bracket ········································································ 23
3.3.8 Installing the Limit Stop ············································································ 27
3.3.9 Installing a Second Actuator ······································································· 28
3.3.10 Programing ······························································································ 29
3.3.11 Display Parameters and Message Codes ······················································· 41
3.4 Pull-to-Open Installation (PLO) ············································································ 45
3.4.1 Locating the Center Line ············································································ 45
3.4.2 Post Bracket Pre-Assembly and Location ······················································ 46
3.4.3 Mounting the Post Bracket ········································································· 48
3.4.4 Connecting the Actuator ············································································ 49
3.4.5 Mounting the Control Box ·········································································· 50
3.4.6 Wiring the Actuator ··················································································· 52
3.4.7 Mounting the Front Bracket ········································································ 56