Need help?Do you have a question about the ZUMMI Halo 204588 and is the answer not in the manual?
Includes warnings about unattended children, allowing play with product, and loads affecting stability.
Specifies carrycot suitability (birth to 9kg) and seat unit age limits (from 6 months).
Emphasizes ensuring locking devices are engaged and attachment devices are secure before use.
Warnings against using damaged parts and placing the product near fire or heat sources.
Details maximum load limits for basket, cup holder, and organiser, noting load impact on stability.
Guidelines on using the product on firm surfaces, engaging brakes, and taking care on kerbs.
Advises using only approved parts and keeping plastic packaging away from children.
Cautionary notes for windy conditions, stairs, car seat usage, and raincover handling.
Instructions for unfolding the chassis and ensuring it locks securely into place.
Step-by-step guide on how to attach and remove the rear wheels securely.
Instructions for attaching and removing the front swivel wheels correctly.
Steps to remove mattress/lining and install metal rods for structural integrity.
Instructions for re-zipping the lining, attaching the canopy, and fitting the bumper bar.
Details on canopy operation, mesh vent access, bumper bar removal, and apron attachment.
A critical warning stating the carrycot is not suitable for overnight sleeping.
Guidance on connecting the carrycot securely to the pram chassis.
Instructions on how to detach the carrycot from the chassis safely.
Specifies weight limits and the required parent-facing orientation for pram mode.
Steps to securely attach the canopy to the seat unit using zippers and clips.
Instructions for attaching and removing the bumper bar to the seat unit.
Guidance on connecting the seat unit securely to the pram chassis.
Instructions on how to detach the seat unit from the chassis safely.
Details on how to make the seat unit forward-facing or parent-facing.
How to operate the brake pedal to engage and release the pram's brakes.
Essential warnings on when to apply the brake for safety.
Instructions on how to lock the front swivel wheels for directional control.
How to use the lever to adjust the seat unit's recline angle.
Instructions for adjusting the height of the handlebar for user comfort.
How to adjust the footrest to the desired position and lock it.
Guidance on how to open or close the canopy by adjusting the rim.
Details on the extension panel, window, and pull-out visor for sun protection.
Instructions for buckling all harness clips and releasing the child.
How to adjust harness straps for a correct and safe fit for the child.
Guidance on setting shoulder strap positions based on the baby's height.
Detailed steps for re-threading harness tabs to adjust shoulder strap height.
Steps to attach the reversible seat liner to the seat unit.
Ensuring correct threading of harness straps through the seat liner slots.
Instructions on how to attach the cup holder to the chassis handle and remove it.
How to wrap and fasten the pram organiser around the chassis handle.
Guidance on fitting the raincover over the stroller and securing it with velcro straps.
Steps to install the car seat adaptors onto the chassis.
How to securely place the car seat onto the installed adaptors.
Instructions for detaching the car seat from the adaptors.
How to detach the car seat adaptors from the chassis.
Explains how elevate adaptors function and how to install them.
Instructions on how to detach the elevate adaptors from the chassis.
Important note that elevate adaptors must always be used when using tandem adaptors.
Steps to hook and secure the tandem adaptors onto the chassis frame.
Details on tandem use with seat unit/carrycot and safety warnings for loading children.
Instructions on how to detach the tandem adaptors from the chassis.
Illustrates single unit configurations: carrycot, seat unit, and car seat on chassis.
Visual guide for tandem setups with carrycot and seat unit.
Visual guide for tandem setups with two carrycots.
Visual guide for tandem setups with two seat units.
Visual guide for additional tandem seat unit configurations.
Visual guides for tandem setups combining car seats with carrycots or seat units.
Visual guide for a tandem setup utilizing two car seats.
Steps to take before folding: apply brake, remove attachments, adjust handle/canopy.
Instructions for pulling release triggers and folding the chassis.
Adjusting the footrest for a more compact folded stroller.
Recommendations for regular maintenance to ensure correct and safe performance.
To Next Page
General