Zurik EMLV - User Manual

DCAC
INTRODUCTION
The Zurik® EMLV Dimmable Driver is the most versatile and efficient dimmable electronic driver for single color output LED strips. This driver has
a high power factor of 0.99, a universal input and perfect compatibility with a wide range of dimmers for flicker free lighting. Its high power
efficiency, wide voltage input, and quiet operation make the EMLV the professional’s choice when it comes to flawless dimming.
SAFETY AND WARNINGS
Install in accordance with the National Electric Code (NEC) Article 450, and local regulations.
This product should be installed and serviced by a qualified electrician.
Install in a well ventilated area free from explosive gases and vapors.
Do not reverse the line voltage polarity upon installation. This will damage the driver.
Risk of electric shock: When used outdoors, install only on a circuit protected by a Class A GFCI.
Risk of fire: Special rated wire required for installations inside walls and building structures.
Consult a qualified electrician. Do not install in wet locations. Install only in dry or damp locations.
Only use with compatible dimmable LED fixtures.
Dimmer switches have minimum load requirements. Review the specifications of the compatible dimmer.
Modifying or disassembling this product beyond these instructions will void the product warranty.
•
•
•
•
•
•
•
•
•
•
ZURIK® EMLV 12V & 24V 200W LED DRIVER
Low Voltage LED Driver
DRIVER
Output Power Wires
Addional Features
(L) Live Channel
(N) Neutral Channel
( ) Ground Channel
Input Power Wire
Negative Channel (-)
Positive Channel (+)
• Constant voltage output
•
Easy installation
•
Cooling by free air convection
•
Compatible with most forward phase, magnetic low voltage,
reverse phase, and electronic low voltage dimmers
•
Flicker-free dimming
•
Suitable for LED lighting and sign applications among other uses
•
Has 2 Output Power Wires with split output
•
Comes with junction box: H: 16” (407mm) W: 3 3/8“ (86mm)
D: 2 5/16” (59mm)
V.2019.08.29
ZRK-EMLV2-200W-XXDC
1page
support@FlexfireLEDs.com 925-273-9080 opt 2
ZURIK® EMLV LED Driver 200W
User Guide

Summary

Installation Guide

Mounting the Junction Box

Optional mounting instructions for the junction box.

Using Knockout Holes

Utilizing knockout holes for wiring connections.

Connecting Power Wires

Guidance on connecting AC line ground, neutral, and live wires.

Connecting with a Dimmer

Instructions for wiring the driver with a dimmer switch.

Identifying LED Strip Channels

How to identify positive (+) and negative (-) channels on LED strips.

Connecting Outbound LED Wires

Connecting the driver's output wires to the LED strip channels.

Wiring Diagrams

Single Driver Wiring

Diagram showing wiring for a single EMLV driver setup.

Multiple Driver Wiring

Diagram illustrating wiring configurations for multiple drivers.

Troubleshooting Guide

Overload and Overheat Issues

Check for driver overload or overheating problems causing issues.

Polarity and Connection Checks

Verify AC line and output terminal polarity and connection security.

Dimmer Compatibility and Power

Ensure dimmer compatibility and correct power requirements are met.

Voltage Drop and Wire Gauge

Address voltage drop by ensuring proper wire gauge selection.

Circuit Breaker Tripping

Troubleshoot issues related to tripped circuit breakers.

Warranty Information

Limited Warranty Details

Overview of the 7-year limited warranty for the product.

Warranty Exclusions

Conditions and product failures not covered by the limited warranty.

Zurik EMLV Specifications

General

Brand	Zurik
Model	EMLV
Category	Control Unit
Language	English