ZWO Electronic Automatic Focuser - Connecting the EAF to Your Telescope

38 pages

To Next Page

To Previous Page

EAF Manual

EAF_Manual_EN_V2.5.doc

6. Connecting your EAF

Remove the coarse adjustment knob of

the telescope focuser with a suitable

sized wrench.

Install the flexible coupling on the

telescope focuser shaft and tighten the

lock screw.

Attach the bracket to the focuser and

then fix it to the EAF body with the

screws.

Attach the bracket to the focuser and then

fix it to the EAF body with the screws.