Do you have a question about the Zy Safe Prime-Care L13 and is the answer not in the manual?
Adjust the height of the shoulder harnesses to fit the child.
Fit the car seat using ISOFIX and Top Tether anchor points.
Pull adjusting straps to tighten harness; ensure snug fit.
Press adjuster buttons to loosen harness and release child.
Remove harness and Top Tether strap before installing without them.
Install using 3-point safety belt and ISOFIX; avoid 2-point belts.
Steps to remove the car seat from the vehicle.
Instructions to re-install the harness and Top Tether strap.
Guidance on where to store the instruction manual.
Loading...