Zyris ISODRY - User Manual

EN
DA
DE
EL
ES
FI
FR
IT
JA
NL
NO
PL
PT
SV
TR
Dental Isolation System
INSTRUCTIONS FOR USE

Summary

Isodry Intended Use, Contraindications, and Side Effects

Intended Use of the Isodry Dental Isolation System

Isodry Installation and Operation Guide

Step-by-Step Installation of the Isodry System

Step-by-step instructions for setting up the Isodry system in a dental operatory, including vacuum connections.

Operating the Isodry Dental Isolation System

Guidance on using the dual vacuum levers to adjust suction and selecting the correct mouthpiece.

Mouthpiece Selection, Attachment, and Placement

Mouthpiece Sizing Methods: Chart and Finger Guide

Attaching and Placing the Mouthpiece in the Mouth

Mouthpiece Placement and Control Head Disassembly

Procedure for Disassembling the Control Head

Cleaning, Disinfection, and Sterilization Procedures

Surface Disinfection of Isodry Components

Guidelines for cleaning the Titanium Control Base and Vacuum Hose between patients using disinfectants.

Sterilization of Vacuum Pipe and Control Base

Procedures for steam autoclaving the vacuum pipe and titanium control base according to validated cycles.

Isodry Maintenance and Lubrication

Maintenance of the Titanium Control Base

Weekly lubrication requirements for vacuum lever O-rings and retainer rings to ensure peak efficiency.

Cleaning and Lubrication of the Vacuum Hose

Isodry Safety Precautions and Warnings

General Cautions for Device Handling

Warnings Related to Mouthpiece Usage

Zyris ISODRY Specifications