Need help?Do you have a question about the ZyXEL Communications GS-105 and is the answer not in the manual?
General| Switching Capacity | 10 Gbps |
|---|---|
| Humidity | 10% to 90% (non-condensing) |
| MAC Address Table | 2K |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Jumbo Frame Support | Up to 9K bytes |
| Ports | 5 x 10/100/1000 Mbps |
Device complies with Part 15 of FCC rules, subject to two conditions for operation.
Equipment tested for Class A digital device, limits designed for commercial environments, potential interference.
Class A product, domestic use may cause radio interference requiring user measures.
Warning for Class A product in residential environments potentially causing radio frequency interference.
Information on product certifications is available on the official ZyXEL website.
Details warranty coverage, remedies, and exclusions, including liability for damages.
Overview of the switch as a high-performance, low-latency store-and-forward device for SOHO.
Illustrates using the switch to connect computers, servers, and print servers for a small workgroup.
Advises that the switch is suitable for office environments and desktop placement.
Steps for placing the switch on a stable surface, ensuring ventilation, and connecting power.
Procedure for connecting the power adapter to the switch and power source.
Details on Ethernet port locations for GS-105 and GS-108 models.
Explanation of auto-negotiation for speed and duplex on the switch's RJ-45 ports.
Description of auto-sensing MDI/MDIX ports for flexible cable connections.
Introduction to the LEDs on the front panel indicating the switch's real-time status.
To Next Page